Files
openclaw-dnd-city-visualiza…/docs/walkthrough-interior-room.md

49 lines
2.4 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Walkthrough: an upstairs shop room
Interiors use the same chain as a city exterior: locate the building, construct one measured room, place cameras,
render untextured plates, then re-surface without moving the set.
## 1. Map position and camera plan
![Map context and camera plan for the upstairs room](img/interior-map-camera.jpg)
Rúnaföngin is an 8.0 × 6.6 m two-story building. The shop occupies the upper floor. Its modeled interior is 6.8 ×
5.4 m, open to a steep roof: eaves 2.6 m above the floor and ridge about 5.5 m. Camera A stands just inside the upper
door at a 1.6 m eye height; camera B looks back from the northwest end. Both use an 86-degree horizontal field of view.
## 2. Build what must agree from both directions
The room model includes:
- 0.6 m walls, open rafters, ridge beam, purlins, and tie beams at x = 2.2 m and 4.6 m;
- a 3.1 m long, 1.0 m high counter beside the southwest wall;
- floor-to-roof shelving at 0.42 m vertical intervals;
- a center table, benches, stools, a small iron stove, and its flue;
- a northwest gable window looking onto a tree, plus a high southeast gable window;
- herb and feather bundles hanging from both tie beams.
Those are solids, not a list of hoped-for objects. Door, windows, counter, beams, and stove therefore remain on the
same walls in both views.
## 3. Render and inspect the plate
![Untextured room plate from camera A](img/interior-plate.jpg)
The plate carries the complete composition: roof volume, openings, furniture scale, sight lines, and hanging bundles.
Color classes identify materials and light sources. The plate gate checks exits, the counter against the 1.6 m eye
line, edge artifacts, and whether a supposed opening is actually in an exterior wall.
## 4. Re-surface the same tripod
![Finished people-free room frame](img/interior-frame.jpg)
The surface pass turns color-keyed blocks into dark timber, shelves, stoppered pots, closed books, metalwork, herbs,
and daylight. It does not get permission to redesign the room. The chosen frame's only recorded QC note was banding
on some book spines, with no readable lettering at inspection zoom.
![Room plate and final frame side by side](img/interior-side-by-side.jpg)
The comparison makes interior continuity easy to audit: the upper door, window, counter, central table, roof pitch,
and tie-beam lines stay registered. Once this people-free keeper exists, later occupied scenes can descend from it
without rebuilding the room.